TMD Magnetic Drive Pumps are designed for Chemical application. They ate mode entirety from fiberglass reinforced polypropylene with outstanding chemical and mechanical resistance ceramics tor the spindle Teflon for the bearing and Viton or EPDM for the 0-nngs. The drive magnet assembly is of ferrite magnets and revolve outside the rear casing driving the impeller magnetically. The pumps are easily maintained without special tools Parts are replaceable and nighty standardized.
Material Of Main Part:-
|Parts||TMD 06-25P/F||TMD 37-75P/F||DAD 150 220P/F|
|Spindle||Ceramic||Ceramic||Ceramic||5U53 16||Ceramic||5U53 I 6|
|Magnet Capsule||Ferric||1 Ferric||Ferric||NFb||Ferric||NFb|
DH Single Stage Volute Process Pump is design according to ASME 73.1M standard. The standard design Is open type impeller but semi-open and closed impellers are also available. The strong structure is fitted for heavy duty applications such as Oil Refinery, Petro-Chemical etc. DH Process Pump is variety of choice of Mechanical Shaft Seal for difference application environment such as Soft Packing, Single Mechanical Seal-S, Multiple Mechanical Seal-D, Quench Arrangement-Q etc. DH Process Pump is design in the heavy duty applications. The design is in stronger structure such as the pump house is in more thick for corrosion allowance; double bearing and oil lubrication for longer life , etc.
DH Flange Standard:
ANSI Class 125 Class 250 ( refer to ASME/ANSI BI6.1 ) ANSI Class 150, Class 300 ( refer to ASME/ANSI B16.5 )
Pulp and Paper Industry
|IMP DA||40-23 L/1-I||80||40|